NACHI IPH-3B-10-20 Gear Pump

Dimension P:1.0 in; Dimension N:13.625 in; Dimension H:4.5 in; Maximum Speed:1600 rpm; Dimension V:0.1 in; Bolt Size:4 x M24; Dimension T:18.5 in; Seal Type:Felt Seal; Cor - Static Load Rating:157366 lbf; Bearing Number:MSE411BR;

Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Surface Treatment:No; Grease Type:Standard Grease; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Take-Up Type; Basic Load Rating, Static Rating(N):23300; Fit:J7; Diameter

P:300 mm; A:49 mm; H:117 mm; C0:20.8 kN; Dz:95 mm; G:M6x1; L1:87 mm; A5:31 mm; A1:16 mm; Z:70.2 mm;

Db - Cup Backface Backing Diameter:1.91 in; r - Cup Backface To Clear Radius1:0.090 in; Y - ISO Factor3:1.95; Cup Part Number:1738X; Design Units:Imperial; Da - Cup Frontface Backing Diameter:2.05 in; Cg - Geometry Factor:0.0521; Series:1700; D:2.2500 in; e - ISO Factor2:0.31;

Number of Bearings:Single; Type:Bearings with Housin; Bearing Part Number:6902; Number of Bearings:Single; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Height

L:167 mm; A1:30 mm; N1:21 mm; Weight:2.18 kg; A:60 mm; s1:16 mm; H:95 mm; H1:19 mm; d:36.51 mm; Designation of open end cover:SCOU207-23;

Rating life coefficient, A2:1.4; d:53.98 mm; Characteristic outer ring frequency, BPF0:6.22 Hz; ra max:3.5 mm; Inventory:0.0; Minimum Buy Quantity:N/A; Dynamic load, C:172 kN; Static load, C0:213 kN; Characteristic inner ring frequency, BPFI:8.78 Hz; Y0:1.05;

Da - Cup Frontface Backing Diameter:762.50 mm; a - Effective Center Location3:31.5 mm; Db - Cup Backface Backing Diameter:747.01 mm; R - Cone Backface To Clear Radius1:6.35 mm; Ab - Cage-Cone Frontface Clearance:8.4 mm; Cage Type:Pin-Type; K - Factor7:1.58; Cone Part Number:EE649240; Y - ISO Factor9

Product Group:B00308; Bore:2.756 Inch | 70 Mill; Precision Class:ABEC 1 | ISO P0; Characteristic outer ring frequency, BPF0:3.08 Hz; Minimum Buy Quantity:N/A; da min:81 mm; D:150 mm; Outer Race Width:1.378 Inch | 35 Mill; Fatigue limit load, Cu:2.95 kN; Static load, C0:68 kN;

J:98 mm; Designation of closed end cover:SCC205; Designation of bearing:UC205-15G2L3; G:M6x1; L:68 mm; C0:7.88 kN; S:14.3 mm; s1:17 mm; A:27 mm; N:12mm;

d:33.34 mm; L:92 mm; C:25.7 kN; s1:21.45 mm; B:42.9 mm; e:20 mm; S:17.5 mm; A2:45.4 mm; J:130 mm; T min.:-40 °C;

Max operating temperature, Tmax:120 °C; Brand:NTN; Y2:1.79; B:25.4 mm; Mass:0.58 kg; Fatigue limit load, Cu:12 kN; Static load, C0:98 kN; Characteristic inner ring frequency, BPFI:10.22 Hz; e:0.33; D:82.93 mm;

Cg - Geometry Factor11:0.0884; Design Units:Imperial; d:2.1250 in; Cone Part Number:78214; Aa - Cage-Cone Backface Clearance:0.24 in; K - Factor7:0.67; C - Double Cup Width:2.0395 in; r - Cup Frontface To Clear Radius2:0.06 in; Bearing Weight:12.03 lb; db - Cone Backface Backing Diameter:2.95 in;

Bearing Retained:Yes (with retaining; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Holder Surface Treatment:Not Provided; Width T(mm):60; Number of Bearings:Double; Bearing Retained:Yes (with re

N:15mm; Recommended tightening torque for set screw:8 Nm; J1:66 mm; L:90 mm; Dz:80 mm; B:32 mm; T min.:-20 °C; Designation of open end cover:SCOU207-22; d:34.92 mm; A1:16 mm;